Lompat ke konten Lompat ke sidebar Lompat ke footer

DIY ___________ magazine holder nr.2 of brass wire








I'm totally in love with various metal wires, partly because they are aesthetically beautiful but also because they are easy to work with and shape as you want. My recent DIY magazine holder no.2 (you can see the first one here), I made by using 2 mm thick brass wire. The holes for the wall are made with equally thick nail. I didn´t have to use no glue to get the wire stuck in the hole, without is the hole minimum 2 cm thick the wire will hold and get stuck in the wall.

metal wire tips:  Do not use thinner metal or brass wire than 2 mm, which is enough hard but still goes to work with. If you want to get sharper bends than what I have done, bend the wire against a table edge. Good luck!


Posting Komentar untuk "DIY ___________ magazine holder nr.2 of brass wire"